Zahir Clothings Ltd management strictly follows the Metal Disposal policy. Our factory management is able to identity the problems in production floor due to needle and metal disposal with following the metal disposal policy.
Policy for Metal Disposal:
- Each Operator should only be in the possession of the number of the needles or
nessecery metal device only required to operate his/her machine.
- All workers and supervisors are trained in sewing floor to collect the broken needles or
any kinds of metal objects from floor.
- In the event if some parts of a broken needle has gone missing, the correct action plan
is to check all the ready garments /parts surrounding that particular machine to ensure
that the broken bits of needle has not fallen into the garments/parts or sewn into seams.
The next step is to check is to check the area surrounding that particular sewing
machine.
- If the broken needle parts are not found, with big magnet or using Metal Detector it
should be confirmed. Then the garments/part should through in to disposal box to
dispose if broken parts not found.
- Like same process, all parts of the broken or used metal are kept in to the metal
disposal box of the each separate floor.
- These wastage metal materials are handover later from disposal box to the respective
by the authosisation of factory management. Moreover, these records are kept in a
different register.